燃气发电机组与柴油发电机组一样，在操作使用时需要注意一些事项，必须注意这些事项才能更好地利用燃气发电机组做好人的工作。那么，下面就来了解一下停电测试燃气发电机运行状态顺利。

Like diesel generator sets, gas generator sets need to pay attention to some matters during operation and use, which must be paid attention to in order to make better use of gas generator sets to do good work. Then, let's take a look at the power failure test and the smooth operation of the gas generator.

接到停电通知时，请提前测试燃气发电机运行状态，确保停电时正常运行。出发的顺序如下。

When receiving the power failure notice, please test the operation status of the gas generator one day in advance to ensure the normal operation during the power failure. The order of departure is as follows.

1、检查气压、润滑油液位、两油箱冷却液液位，

1. Check the air pressure, lubricating oil level and coolant level of two oil tanks,

2、将发电机自动状态切换到手动状态切换开关从3点方向左转至12点方向进入手动状态;

2. Switch the automatic state of the generator to the manual state, and turn the universal switch from 3 o'clock to 12 o'clock to enter the manual state;

3、关闭左下发电机断路器;将电路断路器的把手向下方放倒，极其断开;

3. Close the lower left generator circuit breaker; Turn the handle of the circuit breaker down and disconnect it extremely;

4、启动发电机;将切换开关从12点方转到6点方向，即为点火启动设备。

4. Start the generator; Turn the universal switch from 12 o'clock to 6 o'clock, which is the ignition starting device.

5、机器启动运行后，请注意电压400V、频率50HZ、转速1500转。运行10分钟，水温上升到60时，将切换开关从6点方向转至9点方向，进入待机运行状态，5分钟后机器自动停止;

5. After starting the machine, please pay attention to the voltage of 400V, the frequency of 50HZ, and the speed of 1500 rpm. After running for 10 minutes, when the water temperature rises to 60, turn the universal switch from 6 o'clock to 9 o'clock, and enter the standby operation state. After 5 minutes, the machine automatically stops;

测试结束后，请恢复断路器的接通状态，将切换开关从燃气发电机组的9点到3点方向转动。更多相关内容就来我们网站//www.gz-yanye.com咨询！

After the test, please restore the circuit breaker to the ON state and turn the universal switch from 9:00 to 3:00 of the gas generator set. Come to our website for more relevant content //www.gz-yanye.com consulting service