1，沼气脱硫及稳压、防爆设备：供发起机运用的沼气要先通过脱硫设备，以削减硫化氢对发起机的腐蚀。沼气进气管路上设备稳压设备，以便于对流量进行调整，到达较佳的空燃比。别的，为避免进气管回火，应在沼气总管上安顿防回火与防爆设备。

1. Methane desulfurization, pressure stabilization and explosion-proof equipment: the biogas for the use of the initiator shall pass through the desulfurization equipment first to reduce the corrosion of hydrogen sulfide on the initiator. A pressure stabilizing device is installed on the biogas intake pipeline to facilitate the adjustment of flow to achieve a better air-fuel ratio. In addition, in order to avoid flashback of the intake pipe, anti-flashback and explosion-proof equipment should be installed on the biogas main pipe.

2，进气调整体系：在进气总管上，需设置一套准确、活络的燃气混合器，以调理空气和沼气的混合份额。

2. Air inlet adjustment system: A set of accurate and flexible gas mixer shall be set on the air inlet header to regulate the mixing proportion of air and biogas.

3，发起机焚烧体系：沼气的焚烧速度慢，关于本来运用汽油、柴油已及天然气的发起机的焚烧体系要进行必定程度的改造，以进步焚烧功率，削减后焚烧表象，延伸工作寿数。

3. Incineration system of initiators: the incineration speed of biogas is slow. The incineration system of initiators that originally used gasoline, diesel and natural gas should be reformed to a certain extent to improve the incineration power, reduce the post-incineration appearance and extend the working life.

4，调速体系：若沼气发电机组独立工作，即以用电设备为负荷进行工作，用电设备的并入和卸载都会使发电机的负荷发生动摇。为了保证发电机组正常工作，沼气发起机上的调速体系必不可少。

4. Speed regulation system: if the biogas generator unit works independently, that is, it works with the electrical equipment as the load, the incorporation and unloading of the electrical equipment will shake the load of the generator. In order to ensure the normal operation of the generator set, the speed control system on the biogas generator is essential.

5，预热运用体系：选用预热运用设备，对发起机冷却水和排气中的热量进行运用，进步沼气的动力运用功率。

5. Preheating application system: Preheating application equipment is selected to apply the heat in the cooling water and exhaust of the starter to improve the power utilization of biogas.

6，并网控制体系：首要包含发电机调压电路，主动准同期并排控制电路，手动并排宽和列控制电路，丈量电路，燃气发起机及辅佐设备控制电路等。更多相关内容就来我们网站//www.gz-yanye.com咨询！

6. Grid-connected control system: mainly including generator voltage regulating circuit, active quasi-synchronous side-by-side control circuit, manual side-by-side width and column control circuit, measuring circuit, gas initiator and auxiliary equipment control circuit, etc. Come to our website for more relevant content //www.gz-yanye.com consulting service