焦化发电机组安装、使用、维护，应按照以下步骤一次进行。具体内容小编来讲解一番吧。

The installation, use and maintenance of coking generator set should be carried out at one time according to the following steps. Let's explain the specific content.

认真阅读随机使用、维护说明书

Carefully read the random use and maintenance instructions

开箱后，找到随机的使用、维护说明书，认真、仔细阅读相关内容，并按照说明书要求办理。发电机组的安装、使用、维护，应按照以下步骤一次进行：

After unpacking, find the accompanying operation and maintenance instructions, carefully read the relevant contents, and handle according to the requirements of the instructions. The installation, use and maintenance of the generator set should be carried out at one time according to the following steps:

1、严格按照说明书要求办理；

1. Strictly follow the instructions;

2、具体事宜，参照安装说明指引办理。

2. Refer to the installation instructions for specific matters.

焦化发电机组安装过程中几点注意到事项

Several notices in the installation of coking generator set

1、进口处应以软管连接（按照预留接口，接入沼气管路）。

1. The biogas inlet shall be connected with a hose (connect the biogas pipeline according to the reserved interface).

2、发动机尾气出口处应注意螺纹管是否安装就绪，螺纹管可减小机组运行时对排气管道的震动（按照预留法兰，连接排气管至机房外）。

2. Pay attention to whether the threaded pipe is installed well at the exhaust outlet of the engine. The threaded pipe can reduce the vibration of the exhaust pipe during the operation of the unit (connect the exhaust pipe to the outside of the machine room according to the reserved flange).

3、润滑油（打开机油口盖，加入机油至要求数量）；当环境温度高于–15℃时推荐15W/40级润滑油，当环境温度低于–15℃时推荐使用5W/30。能使用燃气发动机专用润滑油能为燃气发动机提供良好的润滑作用。

3. Lubricating oil (open the oil cap and add oil to the required quantity); 15w/40 grade lubricating oil is recommended when the ambient temperature is higher than – 15 ℃, and 5w/30 grade lubricating oil is recommended when the ambient temperature is lower than – 15 ℃. Being able to use special lubricating oil for gas engine can provide good lubrication for gas engine.

4、机油尺（拔出机油尺，检查机油液面，保证机油在适当位置）。

4. Oil dipstick (pull out the oil dipstick and check the oil level to ensure that the oil is in the proper position).

5、内循环冷却水加注（依据当地气温状况，加注适当防冻液）。

5. Fill with internal circulating cooling water (fill with appropriate antifreeze according to the local temperature).

6、安装输出电缆处（打开盖板，连接电力输出电缆，建议：依据不同功率机组的输出电流选用适合的四芯铜质电缆）。

6. Install the output cable (open the cover plate and connect the power output cable. It is recommended to select the appropriate four core copper cable according to the output current of different power units).

以上就是问题解答的相关内容了，希望能够帮助到大家，如对这一问题还存在任何疑问，都欢迎关注我们网站//www.gz-yanye.com并咨询我们的工作人员，将竭诚为您服务。

The above is the relevant content of the question answer. I hope it can help you. If you still have any questions about this problem, you are welcome to follow our website //www.gz-yanye.com And consult our staff, will serve you wholeheartedly.