今天为大家讲解一下瓦斯发电机组偶件损坏的根本原因及保养，让大家平常可以作为参考使用，对使用设备进行安全工作有帮助。

Today, I will explain to you the root cause and maintenance of the damage of even parts of the gas generator set, so that you can use it as a reference at ordinary times, which is helpful for the safe work of the equipment.

瓦斯发电机组偶件损坏的根本原因除产品质量问题外，主要是对机器使用不当，维修保养不及时、不正确造成的。下面谈几点延长偶件使用寿命采取的措施，以供参考。

In addition to the product quality problems, the root causes of the damage of the couple parts of the gas generator set are mainly caused by the improper use of the machine, the untimely and incorrect maintenance. Here are some measures taken to prolong the service life of the couple for reference.

、严格执行燃油沉淀过滤制度，加注的瓦斯少应经48小时沉淀后才能取用。使用的瓦斯应符合季节规定的标准型号。加油工具要清洁专用。加油和存油的地方也应清洁，以免脏物混入燃油而加速偶件的磨损，降低偶件使用寿命。

Strictly implement the fuel oil sedimentation and filtration system, and the gas injected should be used after 48 hours of sedimentation. The gas used shall conform to the standard model specified in the season. The refueling tools should be clean and special. The place where the oil is filled and stored should also be clean, so as to prevent dirt from mixing with the fuel, which will accelerate the wear of the coupling and reduce the service life of the coupling.

制定严格的技术维护保养规范，燃油滤清器工作100小时，油箱工作500小时各清洗一次，若发现滤芯破损失效应及时更换，不得将其拆除而采用直流式供油。偶件在正常工作条件下工作500小时应拆卸检查一次。

Formulate strict technical maintenance specifications. Clean the fuel filter once every 100 hours and the oil tank once every 500 hours. If the filter element is found to be broken, replace it in time. Do not remove it and use direct flow oil supply. Even parts should be disassembled and inspected once after working for 500 hours under normal working conditions.

在拆卸检查时要保证场所、手、工具和清洗油清洁，以免偶件受污染。在拆卸操作时不得乱敲乱打，在清洗时不要乱堆乱放，不应和其它非偶件在一起盆洗，以免碰伤、擦伤。

During disassembly and inspection, ensure that the place, hands, tools and cleaning oil are clean to prevent even parts from being polluted. It is not allowed to knock and beat randomly during the disassembly operation, and do not pile and place randomly during the cleaning. It is not allowed to wash together with other non matching parts, so as to avoid bruises and scratches.

在装配时不得随意改变装配位置而达到某些不符合机器工作要求的目的。在装出油阀紧座和油嘴紧帽时，应按规定力矩拧紧，以保证装配后的喷油器和喷油泵技术状态的良好。

During assembly, it is not allowed to change the assembly position at will to achieve some purposes that do not meet the working requirements of the machine. When installing the tight seat of the oil outlet valve and the tight cap of the oil nozzle, it should be tightened according to the specified torque to ensure that the assembled fuel injector and fuel injection pump are in good technical condition.

除上述要求外，还应提高对偶件的认识，弄懂偶件的结构特性和工作原理，加强和提高对偶件的维护保养、操作使用，做到无故障时不随意调整，维护使用时不随意拆卸，维修检查时不乱敲乱打，清洗保养时不乱擦乱碰，装配调整时不乱改乱拧，一切按规范技术要求进行，以达到延长其使用寿命的目的。更多的注意事项就来我们网站//www.gz-yanye.com咨询爱吧。

In addition to the above requirements, it is also necessary to improve the understanding of the dual parts, understand the structural characteristics and working principle of the dual parts, strengthen and improve the maintenance, operation and use of the dual parts, and ensure that they are not adjusted at will when there is no fault, not disassembled at will during maintenance and use, not knocked and knocked at random during maintenance and inspection, not rubbed and touched at random during cleaning and maintenance, and not changed and twisted at random during assembly and adjustment, all in accordance with the technical requirements of the specification, In order to prolong its service life. Come to our website for more precautions //www.gz-yanye.com Consult love.