燃气发电机组在使用时要注意的几点!
1、我们在使用时候,先要注意燃气发电机组机房应远离明火区域;
1. When using, we should first pay attention to keeping the gas generator room away from open flames;
2、燃气发电机组机房应宽敞、明亮且要求安装换气扇以保证良好的通风;
2. The gas generator room should be spacious, bright, and require the installation of ventilation fans to ensure good ventilation;
3、燃气发电机组安装时底盘与地基应用平垫铁找平。接触面积应在百分之60以上,且分布均匀;
3. During the installation of gas generator sets, the chassis and foundation should be leveled with flat iron pads. The contact area should be over 60% and evenly distributed;
4、燃气发电机组机房内应符合消防要求,配备灭火器等消防器械;
4. The gas generator room should meet fire protection requirements and be equipped with fire extinguishers and other fire-fighting equipment;
5、室内安装照明、开关、线路及其电器应采用防爆措施,且固定牢固;
5. Indoor installation of lighting, switches, circuits and their electrical appliances should adopt explosion-proof measures and be firmly fixed;
6、燃气发电机组机房内安装可燃气体报警装置,可燃气体泄露时能及时发现;
6. Install combustible gas alarm devices in the gas generator room, which can detect combustible gas leaks in a timely manner;
7、60kw以下单台燃气发动机燃气管路的外部主要管道内径应不小于2吋,靠近发动机的部分内径应不小于1吋。60kw以上燃气发电机组则分别是3吋和两吋。且须安装燃气阀门、型放水阀、防回火装置,燃气管路焊接完成应清理焊渣;
7. The inner diameter of the external main pipeline of the gas pipeline of a single gas engine below 60kW should not be less than 2 inches, and the inner diameter of the part near the engine should not be less than 1 inch. For gas generators above 60kW, they are 3 inches and 2 inches respectively. Gas valves, type drain valves, and anti backfire devices must be installed, and welding slag should be cleaned after welding the gas pipeline;
8、燃气须脱硫、脱水、除尘,其中含流量≤0.25Nm3,氢气≤百分之10。
8. Gas must undergo desulfurization, dehydration, and dust removal, with a flow rate of ≤ 0.25Nm3 and hydrogen gas content of ≤ 10%.
感谢您的阅读,此文的文章来源:沼气发电机组更多的内容和问题请点击: //www.gz-yanye.com我们会继续努力的为您提供服务,感谢您的支持!
Thank you for reading. The source of this article is biogas generator sets. For more information and questions, please click: //www.gz-yanye.com We will continue to work hard to provide you with services. Thank you for your support!